Is a Running Toilet a Problem?

Not only is it frustrating when a toilet runs, it is also a big problem. A running toilet can waste hundreds of gallons of water each day. Even worse, it can cause problems with your plumbing, flooring and walls. A leaky faucet may waste less water, but it can still add up over time and cause damage to septic systems and pipes in your home. So if you’re tired of paying too much for water bills or having to call the plumber out, it’s time to fix your toilet yourself.

How Do You Fix a Toilet that Keeps Running

What are the Three Top Reasons for a Running Toilet

There are a number of reasons that your toilet might be running. Here are the three most common:

1. The float ball is stuck in the up position. This is most common with toilets that use a float ball to operate the fill valve. If the float ball is stuck, it will allow water to fill the tank past its normal level. When the float ball falls back down, it will cause the refill valve to turn on and refill the tank. This can result in an endless cycle of refilling until you fix it.
2. The flapper valve isn’t sealing properly. The flapper valve is located near the bottom of your toilet tank, where it seals against a rubber gasket when you flush your toilet. Over time, this rubber gasket wears out and needs to be replaced with a new one to ensure proper function again.
3. There’s too much stuff in your bowl! Sometimes people don’t realize how much stuff can get caught in their toilet bowls – especially if they have young children or pets who love to play in them! If there’s too much stuff blocking the flow of water through your pipes, then this could cause them to run longer than normal while waiting for water pressure to build enough to push it through.

Here are four ways to stop a running toilet yourself.

The list of things that can go wrong with a toilet is long. But there are four common problems that you can fix yourself, and they’re all fairly easy to troubleshoot. Here are four ways to stop a running toilet yourself.

1. Check the fill tube. The fill tube is the pipe that connects the tank to the bowl. If this is not sealed properly, water will leak into your home. This is usually caused by loose hardware or rusting connections.
2. Check the float. Toilets have a float valve that regulates when water enters into the tank and when it stops flowing into the bowl. If this is not functioning properly, it can cause your toilet to run constantly. Inspect and clean your float valve regularly to ensure its proper operation.
3. Check the handle. If you have an older style toilet, there may be an issue with worn out parts in your flapper valve mechanism or handle assembly that is causing it to run continuously when flushed. Fortunately, replacing these parts yourself is fairly simple and inexpensive!
4. Check the flapper. When your toilet keeps running, the culprit could be a faulty flapper or chain. If the flapper doesn’t seal properly, water will continue to flow out of the tank and into the bowl even though you’ve flushed it. You can easily fix this problem by replacing the flapper with a new one from your local hardware store or plumbing supply store.

Toilet Problems? Don’t Panic, Call A Pro!