Hot water supply problems are usually caused by an undersized water heater or an older heating element that can’t provide enough heat for the amount of cold water entering the tank. If this is the case, then you would need to upgrade your system to improve its efficiency. However, if you’re experiencing issues with hot water intermittently, there could be other factors contributing to the problem.

The most common cause is a clogged drain line, which can cause the water heater to run inefficiently and produce less hot water than usual.

Another common issue is a faulty thermostat, which will cause the temperature of the water to fluctuate. A faulty thermostat can also result in an uneven temperature throughout your house, as well as an increased risk of scalding.

What Causes Hot Water Pressure to Fluctuate?

The water pressure in your house is controlled by a few different factors. One of those factors is the size of your home’s water heater. The larger a home’s water heater, the more hot water it can hold at any given time. If you live in an older home with a smaller water heater or if you have several people living in the same house, then you may experience low water pressure at times when one person is showering or taking a bath. This is because there isn’t enough hot water for everyone to use at once.

Another factor that causes fluctuating water pressure is the type of pipes used in your home’s plumbing system. If you have copper pipes, then the copper will expand and contract as temperatures rise and fall throughout the year. This can cause fluctuations in your hot water supply if you don’t have enough insulation on your pipes (or if there are other heat sources nearby).

Finally, if you have low pressure at all times but still have plenty of hot water when using an appliance such as a dishwasher or washing machine, then this means that there is an issue with either the unit itself or with its electrical connection.

How can I Improve the Water Pressure in my Showerhead?

Check for leaks and make sure all faucets are off when you’re not using them. Leaks waste a lot of water and can cause low pressure.
Ensure that your pipes are properly insulated. Pipes that aren’t insulated tend to have more friction and create more resistance, which will decrease the amount of water flowing through them. Insulating your pipes will allow more hot or cold water to flow through them with less resistance at the same time.
If you have an older home, consider replacing the galvanized steel pipes with copper or plastic ones for better insulation and greater resistance against corrosion (which can cause leaks). You may also want to consider using PEX piping instead of copper piping if you plan on remodeling your bathroom anyway because it’s much easier to work with than copper tubing is (and it doesn’t require soldering).

Why is my Hot Water Pressure Low?

There are many reasons why water pressure can be low in your home. If you’re experiencing a sudden drop in water pressure, it’s likely due to a burst pipe. If the water flow stops completely, call a plumber immediately. Otherwise, check the faucets and shower heads for leaks. If they are leaking, turn off the water at the main shutoff valve and call a plumber.

If everything looks good, then the issue might be with your water heater. The most common reason for this problem is sediment buildup inside the tank or burner. This can cause the burner to not function properly and the results are low pressure and no hot water in some parts of your house.

You can try cleaning out the sediment yourself, but it is better to call a plumbing company like Mullin Plumbing, Inc. who is experienced in doing this.

Water Heater Tank Failure

The most common reason for an inconsistent hot water supply is a leaky tank. When the tank leaks, the water inside is lost and replaced with air, which cools down the remaining water and prevents the burner from heating it further. This can result in cold showers or even no hot water at all!

A leaky tank is normally easy to detect because there will be water dripping from around the base of the unit. You can also check by turning off all faucets in your home and watching for drips at the base of your unit after 15 minutes or so.

If you suspect your tank is leaking, replace it immediately!

What are the Signs of a Failing Water Heater?

There are a lot of reasons why your water heater may be failing and require water heater repair. It could be because of a leaky tank or a malfunctioning pilot light. But if you notice any of the following signs, it’s time to call a plumber:

Water is not getting hot enough
You turn on the faucet and nothing comes out. Or at least, not enough comes out
The water in the tank is rusty, cloudy or smelly
You hear strange noises coming from your water heater
Your hot water takes longer than usual to heat up

Hot Water Heater Repair in Broken Arrow, OK.

If you’re having trouble with water pressure or quality, you likely need water heater repair. If this is the case, you should call a plumber like Mullin Plumbing, Inc. It’s a good idea to have someone come out to your house and check for issues before they become a problem. Obviously, you’ll want to hire a plumber if there’s already a problem. A Mullin Plumbing, Inc. plumber can help you solve a number of problems with your plumbing system. Including leaks, clogs, and other issues. If your hot water supply seems inconsistent, you may need help from a plumber.

Call us today at (918) 209-3133 or fill out this easy online form and someone will contact you about your plumbing concerns.

Why is my Hot Water Supply Inconsistent?