The hot water heater in your house plays a critical roll in a lot of your daily activities and drives a range of appliances in your kitchen restroom and elsewhere. With enough time and pressure, any hot water heater can have a breakdown.
Today, we will have a look at the most common reasons for hot water heater complications, how to repair them and how to understand when it is time to call in a professional for hot water heater repair.
The Most Common Hot Water Heater Issues
The fact is, there are a great deal of things that might randomly take place to fail, but most issues really fall under one of four of the following categories:
Water Temperature Level Problems
The whole point of having a water heater is to manage the temperature of your water, so if that isn’t occurring successfully, it is going to be a significant problem. Here’s a look at how to handle various water heater temperature level problems.
Cold Water From Hot Tap:
The most common cause here is the power source. Check your power switch and then check for a tripped breaker or blown fuse. If this does not resolve the problem, you may have a damaged heating element or a bad thermostat and you will need to contact a water heater repair service, such as Mullin Plumbing HVAC, Septic & Electric for assistance.
Warm but Not Hot Water From Hot Tap:
Normally this indicates a problem with the heating element, thermostat, or the size of your hot water heater. There is even a possibility that there is a mix up in the hot and cold
connections. In any case, you will need to call an expert plumber for help.
Hot Water is Too Hot:
Your thermostat is most likely set too high (above 120 ° F). If you are not sure how to turn down the thermostat, consult your owner’s manual about your specific model of water heater.
Water leaks can cause devastating damage if not caught and handled right away. When it pertains to plumbing of any kind, consisting of a hot water heater, there are a variety of places and causes for leaks. Some of the most common are:
- Leaking water tank
- Bad gasket
- Leak from a plumbing connection
- Loose heating element bolts
- Stuck valve
- Faulty T&P relief valve
- Inaccurate water pressure
To begin fixing the problem, look for loose connections and tighten them where possible (be careful to not over tighten them, as this could possibly create more leaks). Then check the heating element bolts, and tighten them if they are loose. If there is water coming from the heating element, the gasket will likely need to be changed, and you will need to call for a hot water heater repair professional. Last but not least inspect the water tank. If the tank itself is leaking, odds are you will require a completely new tank, which will definitely require an expert plumber.
Discolored water is caused by rust in the water supply. This is typically a sign that your tank is worn away. Contact a professional who may be able to fix the issue by replacing the anode rod. Nevertheless, if this does not resolve the problem you will need an entire new water tank.
Odd noises coming from your water heater are typically triggered by a buildup of sediment. You can flush your hot water heater tank (it’s a fairly easy DIY job), and this may fix the issue. However, if the sediment is too thick or the sound is coming from something else, it might be time to have your water heater upgraded.
New Hot Water Heater Installation
Considering several hot water heater issues originate from the tank, lots of house owners are choosing tankless water heaters. They are incredibly efficient and supply a constant circulation of hot water. Whichever system you determine is right for you, contact Mullin Plumbing HVAC, Septic & Electric for water heater installation and repair.